李尚泽.超高压辅助提取沙棘籽油的工艺优化[J].中国油脂,2021,46(4):11~14.[LI Shangze.Optimization of ultrahigh pressure assisted extraction of sea-buckthorn seed oil[J].China Oils and Fats,2021,46(4):11~14.]
超高压辅助提取沙棘籽油的工艺优化
Optimization of ultrahigh pressure assisted extraction of sea-buckthorn seed oil
  
DOI:
中文关键词:  沙棘籽油  超高压  提取  响应面法
英文关键词:sea-buckthorn seed oil  ultrahigh pressure  extraction  response surface methodology
基金项目:四川省重点研发项目“小浆果产业链关键技术集成与示范”(2018NZ0008)
作者单位
李尚泽 西华大学 食品与生物工程学院成都610039 
摘要点击次数: 822
全文下载次数: 200
中文摘要:
      为提高沙棘籽油得率,以沙棘籽为原料,研究了超高压辅助提取沙棘籽油的工艺。通过单因素实验考察了溶剂类型、超高压压力、保压时间、料液比对沙棘籽油得率的影响,在此基础上采用Box-Behnken响应面法对影响沙棘籽油得率的主要因素进行优化。结果表明:超高压辅助提取沙棘籽油最优工艺条件为以石油醚为溶剂、超高压压力458 MPa、保压时间6.2 min、料液比1∶ 37,在此条件下沙棘籽油得率为15.68%。
英文摘要:
      In order to improve the yield of sea-buckthorn seed oil, with sea-buckthorn seed as raw material, the process of ultrahigh pressure assisted extraction of sea-buckthorn seed oil was studied. The effects of solvent type, ultrahigh pressure, pressure holding time, and material-liquid ratio on the yield of sea-buckthorn seed oil were investigated through single factor experiment. Then the main factors affecting the yield of sea-buckthorn seed oil were optimized using the Box-Behnken response surface methodology. The results showed that the optimal process conditions for extracting sea-buckthorn seed oil were obtained as follows: using petroleum ether as solvent, ultrahigh pressure 458 MPa, pressure holding time 6.2 min and material-liquid ratio 1∶ 37. Under these conditions, the yield of sea-buckthorn seed oil was 15.68%.
查看全文   查看/发表评论  下载PDF阅读器
关闭
《中国油脂》杂志社 官方网站
地址:西安市劳动路118号 邮编:710082
电话:029-88617441 88621360 88626849 传真:029-88625310
您是第9807386位访客  京ICP备09084417号