| 蒋惠亮,王相明,毛孙房，等.高活性油脂加氢催化剂的制备[J].中国油脂,2013,38(7):.[JIANG Huiliang,WANG Xiangming,MAO Sunfang,etc.Preparation of highly active catalyst for hydrogenation of oils and fats[J].China Oils and Fats,2013,38(7):.] |
| 高活性油脂加氢催化剂的制备 |
| Preparation of highly active catalyst for hydrogenation of oils and fats |
| |
| DOI： |
| 中文关键词: 油脂 加氢 镍催化剂 复配 |
| 英文关键词:oils and fats hydrogenation Ni catalyst complex |
| 基金项目: |
|
| 摘要点击次数: 1386 |
| 全文下载次数: 0 |
| 中文摘要: |
| 以硅酸钠和盐酸为原料制备载体多孔二氧化硅，以金属硝酸盐为前驱体，沉淀法制备油脂加氢催化剂，考察了制备方法，镍负载量，二氧化硅载体比表面积，催化剂助剂铁、钴等对催化剂活性的影响。结果表明：沉淀法效果优于浸渍法；最佳镍负载量为30%左右；二氧化硅载体的最佳比表面积为500～600 m2/g；最佳镍铁质量比为100∶1；创新采用钴助剂，镍钴最佳质量比仅为2 000∶1。镍钴复配催化剂具有制备过程简便，成本低廉，活性高等优点。 |
| 英文摘要: |
| The porous SiO2 carrier was prepared with sodium silicate and hydrochloric acid as raw materials,and the highly active catalyst for hydrogenation of oils and fats was prepared by precipitation method using metal nitrates as precursor. The effects of preparation method,Ni loading amount, specific surface area of SiO2, catalyst additives Fe and Co on catalytic activity of the catalyst were investigated. The results showed that precipitation method was better than impregnation method and the optimal preparation conditions were as follows: Ni loading amount 30%, specific surface area of SiO2 500-600 m2/g, mass ratio of Ni to Fe 100∶1,mass ratio of Ni to Co 2 000∶1. The Ni-Co complex catalyst had advantages of simple preparation process, low cost and high activity. |
| 查看全文 查看/发表评论 下载PDF阅读器 |
| 关闭 |
|
|
|
