| 李 安,肖小年,郭 烨，等.柚子籽油-β-环糊精微胶囊制备工艺的优化[J].中国油脂,2013,38(10):.[LI An,XIAO Xiaonian,GUO Ye，etc.Preparation of pomelo seed oil-β-cyclodextrin microcapsule[J].China Oils and Fats,2013,38(10):.] |
| 柚子籽油-β-环糊精微胶囊制备工艺的优化 |
| Preparation of pomelo seed oil-β-cyclodextrin microcapsule |
| |
| DOI： |
| 中文关键词: 柚子籽油 微胶囊 β-环糊精 |
| 英文关键词:pomelo seed oil microcapsule β-cyclodextrin |
| 基金项目: |
|
| 摘要点击次数: 1222 |
| 全文下载次数: 0 |
| 中文摘要: |
| 以β-环糊精为壁材，采用β-环糊精饱和水溶液法对柚子籽油进行微胶囊包埋。研究表明壁油比（β-环糊精质量（g）与柚子籽油体积（mL）比）、包埋时间、包埋温度对微胶囊包埋率影响程度大小为：包埋温度＞包埋时间＞壁油比。在单因素实验基础上通过响应面法优化，确定的最佳工艺条件为：壁油比4.5∶1，包埋时间132 min，包埋温度47℃。在最佳工艺条件下，柚子籽油的包埋率为92.18%。 |
| 英文摘要: |
| With β-cyclodextrin as wall material, pomelo seed oil-β-cyclodextrin microcapsule was prepared by β-cyclodextrin saturated aqueous solution method. The effects of ratio of wall material to oil (mass of β-cyclodextrin (g) to volume of pomelo seed oil(mL)), embedding time, embedding temperature on embedding rate were studied, and the effect degree was as follows:embedding temperature＞embedding time＞ratio of wall material to oil. On the basis of single factor experiment, the optimal process parameters were determined by response surface methodology as follows:ratio of wall material to oil 4.5∶1, embedding time 132 min, embedding temperature 47[KG-*8]℃. Under the optimal conditions, the embedding rate of pomelo seed oil was 92.18%. |
| 查看全文 查看/发表评论 下载PDF阅读器 |
| 关闭 |
|
|
|
