王寒,于华忠,罗庆华,等.响应面法优化大鲵油微胶囊制备工艺[J].中国油脂,2017,42(9):.[WANG Han, YU Huazhong, LUO Qinghua,et al.Optimization of preparation process of giant salamander oil microcapsule by response surface methodology[J].China Oils and Fats,2017,42(9):.]
响应面法优化大鲵油微胶囊制备工艺
Optimization of preparation process of giant salamander oil microcapsule by response surface methodology
  
DOI:
中文关键词:  大鲵油  中国大鲵  微胶囊  响应面法
英文关键词:giant salamander oil  Andrias davidianus  microcapsule  response surface methodology
基金项目:
作者单位
王寒,于华忠,罗庆华,等  
摘要点击次数: 883
全文下载次数: 0
中文摘要:
      为了提高大鲵油的稳定性,采用喷雾干燥法制备大鲵油微胶囊。对壁材进行选择后,以包埋率为指标,研究壁材配比、壁芯材质量比、壁材添加量和乳化剂添加量对大鲵油微胶囊化的影响。通过单因素实验,利用响应面软件Box-Behnken设计模型确定大鲵油微胶囊化的最佳工艺条件。结果表明:大鲵油微胶囊化的最佳工艺条件为壁材配比(β-环状糊精与阿拉伯胶质量比)3.44∶1、壁芯材质量比5.37∶1、壁材添加量6.46%、乳化剂添加量2%(以壁材质量计)。在最佳工艺条件下,大鲵油微胶囊包埋率为88.06%。
英文摘要:
      In order to improve the stability of giant salamander oil, giant salamander oil microcapsule was prepared by spray drying method. After selection of wall materials, with embedding rate as index, the effects of ratio of wall materials, mass ratio of wall material to core material, dosage of wall material and dosage of emulsifier on the microencapsulation of giant salamander oil were studied. Based on single factor experiment, the optimal process conditions were determined by Box-Behnken design as follows: ratio of wall materials 3.44∶1, mass ratio of wall material to core material 5.37∶1, dosage of wall material 6.46% and dosage of emulsifier 2%(based on the mass of wall material). Under these conditions, the embedding rate of giant salamander oil microcapsule was 88.06%.
查看全文   查看/发表评论  下载PDF阅读器
关闭
《中国油脂》杂志社 官方网站
地址:西安市劳动路118号 邮编:710082
电话:029-88617441 88621360 88626849 传真:029-88625310
您是第9918112位访客  京ICP备09084417号