| 李伟，张永康，王晓勍，等.杜仲籽油微乳饮料生产工艺研究[J].中国油脂,2019,44(2):.[LI Wei, ZHANG Yongkang, WANG Xiaoqing，etc.Production process of Eucommia seed oil microemulsion beverage[J].China Oils and Fats,2019,44(2):.] |
| 杜仲籽油微乳饮料生产工艺研究 |
| Production process of Eucommia seed oil microemulsion beverage |
| |
| DOI： |
| 中文关键词: 杜仲籽油 微乳饮料 生产工艺 稳定性 |
| 英文关键词:Eucommia seed oil microemulsion beverage production process stability |
| 基金项目: |
|
| 摘要点击次数: 899 |
| 全文下载次数: 0 |
| 中文摘要: |
| 以杜仲籽油为主要原料，对杜仲籽油微乳饮料的生产工艺进行研究，通过正交试验探讨了原料配比、乳化剂与稳定剂复配比例，通过单因素试验探讨了剪切工艺条件。结果表明：杜仲籽油微乳饮料原料配比为杜仲籽油、β-环糊精、麦芽糖浆、柠檬酸用量分别为2.0%、2.5%、7.5%、015%；以大豆卵磷脂、单甘酯、果胶、CMC-Na为复配乳化稳定剂，用量分别为1.0%、1.0%、012%、0.12%；在8 000～10 000 r/min、75～85?℃下进行高速剪切乳化分散25 min，形成稳定的油包水体系，风味、口感及稳定性较好，微生物指标在国标范围内。 |
| 英文摘要: |
| With Eucommia seed oil as the main raw material, the production technology of Eucommia seed oil microemulsion beverage was studied. The material ratio and the compound ratio of emulsifier and stabilizer were discussed by orthogonal experiment, and the shearing process was discussed by single factor experiment.The results showed that Eucommia seed oil microemulsion beverage was composed of 2.0% of Eucommia seed oil, 2.5% of β-cyclodextrin, 7.5% of malt syrup, 0.15% of citric acid, 1.0% of soybean lecithin, 1.0% of glycerol, 0.12% of pectin and 0.12% of CMC-Na, and the optimal shearing conditions were obtained as follows: shearing speed 8 000-10 000 r/min, shearing temperature 75-85?℃ and shearing time 25 min. Under these conditions, a stable water in oil system with good flavor, taste and stability formed,and the microbiological indicators were within the national standard. |
| 查看全文 查看/发表评论 下载PDF阅读器 |
| 关闭 |
|
|
|
