| 孙义明.蓖麻油的改性及其在水包油型混凝土脱模剂中的应用[J].中国油脂,2020,45(8):76~80.[SUN Yiming.Modification of castor oil and its application in oil-in-water concrete release agent[J].China Oils and Fats,2020,45(8):76~80.] |
| 蓖麻油的改性及其在水包油型混凝土脱模剂中的应用 |
| Modification of castor oil and its application in oil-in-water concrete release agent |
| |
| DOI：10.12166/j.zgyz.1003-7969/2020.08.016 |
| 中文关键词: 混凝土脱模剂 蓖麻油 硅烷偶联剂 乳化 |
| 英文关键词:concrete release agent castor oil silane conjugate agent emulsion |
| 基金项目: |
|
| 摘要点击次数: 786 |
| 全文下载次数: 203 |
| 中文摘要: |
| 蓖麻油具有羟值高、低温稳定性好和摩擦系数低等优点。使用佛尔酮二异氰酸酯（IPDI）和硅烷偶联剂KH-550对蓖麻油进行改性，以提高其脱模效果，配合含氢硅油进行乳化得到一种低成本、环境友好的新型脱模剂，并对合成产物进行红外光谱分析和乳化条件讨论。红外结果表明：成功制备了KH-550封端IPDI改性蓖麻油。将改性蓖麻油制成相应的乳液后，脱模性能测试表明：当含氢硅油质量分数为15%、m(Span-60)∶ m(Tween-60)=0.43∶ 0.57、乳化剂质量分数为15%时，可以制得稳定性较为突出的水包油型混凝土脱模剂，且在稀释1倍的情况下脱模效果良好，符合行业标准JC/T 949—2005要求。 |
| 英文摘要: |
| Castor oil has the advantages of high hydroxy value, good low temperature stability and low coefficient of friction. Castor oil was modified with isophorone diisocyanate(IPDI) and silane conjugate agent KH-550 to improve its release effect, and it was emulsified with hydrogen-containing silicone oil to obtain a low-cost, environmentally friendly new release agent. The synthetic products were analyzed by infrared spectroscopy and the emulsification conditions were discussed. The infrared spectroscopy results showed that the KH-550 terminal IPDI modified castor oil was successfully prepared, then it was prepared into the corresponding emulsion, the release performance test showed that under the conditions of the mass fraction of hydrogen-containing silicone oil 15%, m(Span-60)∶ m(Tween-60)=0.43∶ 0.57 and the mass fraction of the emulsifier 15%, oil in water concrete release agent with outstanding stability was obtained and in the case of dilution doubled the release effect was good, which could meet the requirement of industry standard JC/T 949—2005. |
| 查看全文 查看/发表评论 下载PDF阅读器 |
| 关闭 |
