The setting oil tank is an indispensable processing equipment in the oil pressing process, which plays an important role in the separation of cake residue and oil. However, in the process of production and use, it was found that there were some problems in the structure of the tank, such as the wear of the box body caused by the tension of the chain, the vertical lifting affecting the handling capacity, the small radius of rotation causing serious storage, and the difficult replacement of vulnerable parts.In view of these problems, the structure of the setting oil tank was improved. For example, the tank was changed to an inclined state, the falling materials would fall to the next scraper. The driven shaft system was changed into the driving shaft system, and the original driving shaft system was changed into the tension shaft system, and the distance between the sprocket and the box body was increased, and the diameter of driven sprocket was increased. The cake dregs were discharged to the box body, and then settled through the partition, and overflowed to the box body on the other side through the opening of the middle partition. The internal partition was changed into a structure that could be quickly removed. The shape of the original auxiliary oil tank was changed into a cylinder. The practice found that the machine wear was reduced, which could meet the requirements of larger processing capacity, the residue removal effect was significantly increased, and the equipment maintenance rate reduced. |